Black Widow Security BW RAS 100 Manuale di Installazione Pagina 4

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 3
to the feature you wish to change. The LED and
parking lights will flash each time the switch is
pushed. (Example: to program feature #3 press
the program switch 3 times).
Press button 1 on the remote to turn the
feature on, the LED and parking lights will
flash once.
Press button 2 on the remote to turn
feature off- the LED and parking lights will
flash twice.
System will automatically exit program mode.
NOTE: You must re-enter program mode for
each feature you wish to change.
*For programming you will need a receiver and transmitter.
Programmable Features
Program #1: Parking Light Operation. Selects
whether the parking lights remain on or flash
during remote start.
On = Constant
Off = Flash on/off every 5 seconds.
Program #2: Remote Start Run Time
On = 12 minutes
Off = 24 minutes
Program #3: Door Lock Pulse Length
On = 0.5 second door lock/unlock pulse
Off = 3 second door lock/unlock pulse
Program #4: Door Unlock Pulse
On = Single
Off = Double
Program #5: Orange Wire Programming
On = 1 Pulse Start
Off = 3 Pulse Start
Program #6: Lock Before & After Engine Crank
On = Lock when remote start activates
Off = Disabled
Default Reset
To reset all programmable features to their factory
default settings:
1. Turn ignition to the on position.
2. Wait 2 seconds.
3. Within 10 seconds press program switch 5
times. The LED and parking lights flash to
indicate the system is now in program mode.
4. Press transmitter buttons 1 & 2 .The parking
lights will flash 3 times and all programmable
features will be reset to the
On position.
Dip Switch Settings
Make sure to set all dip switches in proper
position prior to mounting the module.
Dip Switch #1: Tach/Spark sense
On = Current sense
Off = Tach/Spark sense
Dip Switch #2: Vacuum switch
On = Current sense or tach/spark sense
Off = Vacuum switch sense
Dip Switch #3: Starter cranking time
On = Standard crank time
Off = Extended crank time (auto adjusts)
Dip Switch #4: Diesel Mode
On = Standard mode
Off = Diesel mode - Ignition turns on for
several seconds prior to cranking the
starter (to allow glow plugs to warm up).
Remote Programmable Features:
Step Function Button 1 (On) Button 2 (Off)
1. Parking Light Operation Solid Flash / 5 Seconds
2. Run Time 12 Minutes 24 Minutes
3. Door Lock Pulse Length .75 Seconds 3 Seconds
4. Door Unlock Pulse Single Double
5. Orange Wire Programming 1 Pulse Start 3 Pulse Start
6. Door Lock Before Engine Crank On Off
4
Vedere la pagina 3
1 2 3 4 5 6 7 8

Commenti su questo manuale

Nessun commento