Black Widow Security BW RAS 130 Manuale di Installazione

Navigare online o scaricare Manuale di Installazione per Sistemi di controllo di accesso Black Widow Security BW RAS 130. Black Widow Security BW RAS 130 Installation manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 0
REMOTE AUTO START
FOR KEYLESS ENTRY AND ADD-ON REMOTE START MODULES
BEFORE INSTALLING THIS PRODUCT PLEASE READ
THIS INSTALLATION MANUAL THOROUGHLY!!
INSTALLATION MANUAL
This remote start product is intended for installa-
tion on vehicles equipped with automatic transmis-
sions and electronic fuel injection only!
DO NOT INSTALL THIS UNIT INTO A MANUAL
TRANSMISSION VEHICLE AS IT COULD RESULT IN
SERIOUS INJURY OR DEATH.
This product must be installed by qualified per-
sonnel according to these instructions and
observing all safety features.
• The system should be placed into the valet
mode when parked inside a garage or being left for
service.
Always notify service personnel that the vehi-
cle is equipped with a Remote Starter.
Only start the vehicle in a well ventilated area.
Do not use in a closed garage or indoors.
ITEMS INCLUDED:
Main unit
Remote transmitter(s)*
Plug In LED
Plug in program switch
Harness kit with 2 heavy duty fuse holders
Hood pinswitch
Extended range receiver module*
Owners manual
*
S models are provided with single transmitter only.
Add-on modules do not include transmitters.
OPTIONAL ACCESSORIES:
VAC-10 Vacuum Switch Kit
APP-1 Universal OEM transponder bypass kit
APV-1 GM VATS, Passlock I&II bypass kit
PDLM-3 Power door lock relay module
Before you begin the installation:
Verify that the vehicle is equipped with elec-
tronic fuel injection.
Verify that the vehicle is equipped with an auto-
matic transmission.
Check to see if the vehicle is equipped with any
type of factory security system.
Check to see if there is a pinswitch for the
hood, if not one must be installed.
Verify that the vehicle starts and idles proper-
ly before you start the installation.
Verify with the customer the desired location
for the program switch and LED.
Always use a multimeter when verifying vehi-
cle wiring.
Remote Start Installation Notes:
The remote start unit senses the vehicles success-
ful start using one of the following methods:
1. Current sense
2. Tachometer sense
3. Spark or coil wire sense
4. Using optional vacuum switch.
Vedere la pagina 0
1 2 3 4 5 6 7 8

Sommario

Pagina 1 - REMOTE AUTO START

REMOTE AUTO STARTFOR KEYLESS ENTRY AND ADD-ON REMOTE START MODULESBEFORE INSTALLING THIS PRODUCT PLEASE READTHIS INSTALLATION MANUAL THOROUGHLY!!INSTA

Pagina 2

If the Current Sense feature of the remote startunit does not allow proper operation, the tachsense/spark sense wire may be used, or an option-al vacu

Pagina 3

• GRAY WIRE - Ground When Running Output (-).Connect to a relay for starter anti-grind protection.(See installation diagrams). The GRAY wire pro-vide

Pagina 4 - Remote Programmable Features:

equal to the feature you wish to change. TheLED and parking lights will flash each time theswitch is pushed. (Example: to program feature #3press the

Pagina 5

Valet ModeWhen the Valet mode is activated, the vehicle willnot start using the remote, but keyless entry func-tions will still operate.To enter valet

Pagina 6

6FIGURE 1. OPTIONAL VACUUMSYSTEM HOOK-UPVACUUMSWITCHEXISTING CARVACUUM HOSEYELLOWGROUNDEXISTING CARVACUUM HOSEFor vacuum switch hook-up dip switch #2=

Pagina 7 - REMOTE START TROUBLESHOOTING

7ProblemUnit will not operate.Keyless Entry features operatebut vehicle will not start.Vehicle will not remote start.Engine cranks but not longenough

Pagina 8 - Relay Module (not included)

8POSITIVE TRIGGER DOOR LOCK CIRCUIT:REVERSE POLARITY (ADDING ACTUATORS):REVERSE POLARITY USING FACTORY SYSTEMS:GROUNDGREEN WIREGROUNDBLUE WIREGREEN WI

Commenti su questo manuale

Nessun commento