Black Widow Security BW RAS 100 Manuale di Installazione Scaricare il pdf (Pagina 4)

- 3 -

CONNECTOR PIN NUMBERS AND WIRE COLOR CODES

14-PIN HARNESS

# COLOR FUNCTION NOTES

1) Red +12 VDC Main Power. Connect this wire to the POSITIVE

terminal of the vehicle’s battery, with the supplied

fuse installed.

2) Wht/Org Parking See the wiring diagram for the proper connection of

Light (+) this wire. For negative output see Page 5.

3) Orange Siren (+) Connect this wire to the RED wire of the Siren.

Output is +12 volts when the alarm is triggered.

4) Grn/Blk Door Negative output pulse to door LOCK circuit. See

Lock (–) door lock wiring diagrams on Page 5 for connections.

5) Yellow Door Negative output pulse to door UNLOCK circuit.

Unlock (–) See door lock wiring diagrams on Page 5 for connections.

6) Gray Starter Negative output to the Starter Interrupt relay.

Interrupt (–) See Wiring diagram for connections.

7) Red/Blk LED (–) Connect to the BLACK wire of the BWS-180 LED.

8) Wht/Yel – Not applicable on BW–1150.

9) Blue (–) Trip Negative trip input for connection to an external

shock or motion sensor.

10) Violet Valet (–) Connect to the VALET switch.This switch is needed for

entering the Code Learning Sequence and Valet/Override

functions.

11) Green Ignition Connect to a source of TRUE IGNITION, a wire that is

hot in both the RUN and START positions.

12) Black Ground Connect this wire to a clean, solid GROUND.

Do Not

confuse this wire with the short, black antenna wire.

Do Not Ground The Antenna Wire!

13) White Positive Connect this wire to door pinswitches that are

Door (+) POSITIVE when the door is open.

14) Blu/Wht Negative Connect this wire to door pinswitches that are

Door (–) NEGATIVE when the door is open.

1 2 3 4 5 6 7 8

Nessun commento

Black Widow Security BW RAS 100 Manuale di Installazione Pagina 4