Black Widow Security BW FM 250 Manuale di Installazione Scaricare il pdf (Pagina 3)

within 5 seconds press button #3.You will

hear a normal arming chirp, (as long as

arming chirps are on), then right after you

press buttons #3 you will hear a second

short chirp, confirming that the Shock

sensor and auxiliary sensor input will not

be monitored. Once you disarm and

rearm, the sensor will normally be moni-

tored.

Using the temporary remote sensor and

trigger bypass to diagnose falsing prob-

lems will allow you to easily find the

defective input. (Have the customer turn

one or the other off, and see if falsing still

occurs).

Note: You may not turn off both

sensor or trigger inputs at the same time.

Temporary Chirp Mute: If you wish to

mute arm/disarm chirps:

1. Press button

#2 momentarily,

2. Next press button #1

to arm or disarm. Chirps can only be

heard if standing right next to vehicle.

Chirps will be muted for one complete

cycle (arm/disarm).

Dip Switch Programmable Features:

Switch #1 = Lock/Unlock Pulse Time: ON: .75 seconds OFF: 3 seconds

Switch #2 = Ignition Triggered Door Locks: ON: Feature On OFF: Feature OFF

Switch #3 = Passive Door Locks: ON : Feature On OFF: Feature OFF

Switch #4 = Passive or Active Arming: ON: Passive Arm OFF:Active Arm

Summary of Inputs and outputs:

Inputs: Outputs

1 Sensor port-4 wire (w/warn away) Siren output: 3 amp Max - positive

Negative door trigger Flashing lights: relayed - 15 amp Max

1 Negative hood/trunk trigger Dome Light: 500 mA

1 Positive door trigger Door lock/unlock : 500 mA -negative

2 nd Channel: 500 ma- negative

3rd Channel: 500 ma - negative

Armed Output: 250 ma - negative

1 2 3 4 5 6 7 8 ... 15 16

Nessun commento

Black Widow Security BW FM 250 Manuale di Installazione Pagina 3